Garelick 75007 ADJUSTABLE SEAT SWIVEL CLAMP Manuel d'utilisateur télécharger pdf

Assembly and Mounting Instructions for

Model 75007 Clamp Type Swivel Fishing Chairs

Form 12.142

SWIVEL CLAMP ASSEMBLY

1. Take swivel clamp and rotate its top and bottom halves so slots on

bottom plate are exposed (fig. 1).

2. Attach swivel clamp to seat bottom by aligning the holes in the

seat and the slots in the clamp. Secure the clamp in position as

indicated in fig. 1.

CLAMP ADJUSTMENT AND MOUNTING

1. Extend clamp rods (B) and (C) by screwing out both hex nuts (D)

and wing nuts (E) to the extreme ends of the threaded clamp rods

(see fig. 1).

2. Place seat over bench with WING NUTS TO THE REAR (fig. 2).

3. Tighten up clamp as close as possible to bench’s width using

clamp rod (C) and hex nuts (D) first.

4. Secure clamp to bench by tightening wing nuts (E).

SPECIAL MOUNTING SITUATIONS

WIDE BENCHES:

For Benches 12

⁄2 inches to 15 inches

On wide benches; sleeve tubes (F) can be cut shorter or

eliminated to give added width to the clamp (fig. 2).

FIG. 3

FIG. 2

FIG. 1

FIG. 4

Write for

a Complete

Catalog

Phone: 612-459-9795

PO Box 8, 644 2nd Street E-mail: [email protected]

St. Paul Park, Minnesota 55071 On the Web: www.garelick.com

9/01

For Benches 15 Inches to 18 Inches.

On extremely wide benches, remove sleeve tubes (F) from clamp

assembly. Take off both nuts (D) and pull clamp rod out so the rod

ends are exposed in notches as pictured in fig. 3. Thread on both

nuts (D). Make certain that the nuts have threads extending

through their ends. Pull clamp rod out so nuts abut with clamp

washers (G) as pictured in fig. 3.

NARROW BENCHES: On some narrow benches, the clamp rods may

extend beyond the seat. It may be advisable to cut the exposed rods

and file the ends.

TANK TYPE BENCHES: On tank type benches as pictured in fig. 4, it is

recommended that a wood strip be added to the tank and secured in

position as illustrated. This will allow your seat to be mounted securely.

CARE AND MAINTENANCE

• Periodically grease swivel for easy operation.

Résumé du contenu

Page 1 - CARE AND MAINTENANCE

Assembly and Mounting Instructions forModel 75007 Clamp Type Swivel Fishing ChairsForm 12.142SWIVEL CLAMP ASSEMBLY1. Take swivel clamp and rotate its

Commentaires sur ces manuels

Pas de commentaire

Garelick 75007 ADJUSTABLE SEAT SWIVEL CLAMP Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Garelick 75007 ADJUSTABLE SEAT SWIVEL CLAMP. Garelick 75007 ADJUSTABLE SEAT SWIVEL CLAMP User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Meubles Garelick 75007 ADJUSTABLE SEAT SWIVEL CLAMP